The cellulose fibers functionalized with star-like zinc oxide nanoparticles with boosted antibacterial performance for hygienic products.

Bacterial infectious diseases are serious health problem which extends to economic and social complications. Moreover, bacterial antibiotic resistance, lack of suitable vaccine or emergence of new mutations is forcing the development of novel antimicrobial agents. The objective of this study is to synthesize and characterize star-like zinc oxide nanoparticles for the application of antibacterial activities in cellulose based hygiene products. ZnO NPs were in situ synthesized via precipitation method on the surface of cellulose fibers. Since bactericidal activity of nanoparticles in part depends on the concentration in the growth medium, various amount of ZnO was incorporated into cellulose matrix ranging from 1 to 3 wt%. Microscopic (TEM, SEM) and spectroscopic (FT-IR, XRD) methods were utilized to investigate the final products. The infrared absorption spectra analysis supported by theoretical finding that during the reaction, ZnO nanoparticles could be bonded with cellulose fibers via hydrogen bonding. The yield of functionalization was determined through thermogravimetric analysis. Collected data proved the successful functionalization of the cellulose fibers with nanoparticles. Static contact angle measurements were carried out showing absorptive character of as prepared fabrics. All the samples were tested for the antibacterial properties and the results were compared to the samples prepared from the pristine cellulose fibers. Moreover, mechanical tests were performed revealing that the addition of only 2 wt% of the nanofiller boosted tensile, tearing and bursting strength by a factor of 1.6, 1.4 and 2.2 in comparison to unfunctionalized paper sample, respectively. Fabricated fabric presenting high hydrophilicity and antibacterial properties have gained increased applications in fabric industry, including hygiene product industry and hence the result of this study would be a welcomed option.

An Amphiphilic Carbonaceous/Nanosilver Composite-Incorporated Urinary Catheter for Long-Term Combating Bacteria and Biofilms.

Biofilms formed on urinary catheters remain a major headache in the modern healthcare system. Among the various kinds of biocide-releasing urinary catheters that have been developed to prevent biofilm formation, Ag nanoparticles (AgNPs)-coated catheters are of great promising potential. However, the deposition of AgNPs on the surface of catheters suffers from several inherent shortcomings, such as damage to the urethral mucosa, uncontrollable Ag ion kinetics, and unexpected systematic toxicity. Here, AgNPs-decorated amphiphilic carbonaceous particles (ACPs@AgNPs) with commendable dispersity in solvents of different polarities and broad-spectrum antibacterial activity are first prepared. The resulting ACPs@AgNPs exert good compatibility with silicone rubber, which enables the easy fabrication of urinary catheters using a laboratory-made mold. Therefore, ACPs@AgNPs not only endow the urinary catheter with forceful biocidal activity but also improve its mechanical properties and surface wettability. Hence, the designed urinary catheter possesses excellent capacity to resist bacterial adhesion and biofilm formation both in vitro and in an in vivo rabbit model. Specifically, a long-term antibacterial study highlights its sustainable antibacterial activity. Of note, no obvious toxicity or inflammation in rabbits was triggered by the designed urinary catheter in vivo. Overall, the hybrid urinary catheter may serve as a promising biocide-releasing urinary catheter for antibacterial and antibiofilm applications.

Biogenic Synthesis of Copper Nanoparticles Using Bacterial Strains Isolated from an Antarctic Consortium Associated to a Psychrophilic Marine Ciliate: Characterization and Potential Application as Antimicrobial Agents.

In the last decade, metal nanoparticles (NPs) have gained significant interest in the field of biotechnology due to their unique physiochemical properties and potential uses in a wide range of applications. Metal NP synthesis using microorganisms has emerged as an eco-friendly, clean, and viable strategy alternative to chemical and physical approaches. Herein, an original and efficient route for the microbial synthesis of copper NPs using bacterial strains newly isolated from an Antarctic consortium is described. UV-visible spectra of the NPs showed a maximum absorbance in the range of 380-385 nm. Transmission electron microscopy analysis showed that these NPs are all monodispersed, spherical in nature, and well segregated without any agglomeration and with an average size of 30 nm. X-ray powder diffraction showed a polycrystalline nature and face centered cubic lattice and revealed characteristic diffraction peaks indicating the formation of CuONPs. Fourier-transform infrared spectra confirmed the presence of capping proteins on the NP surface that act as stabilizers. All CuONPs manifested antimicrobial activity against various types of Gram-negative; Gram-positive bacteria; and fungi pathogen microorganisms including Escherichia coli, Staphylococcus aureus, and Candida albicans. The cost-effective and eco-friendly biosynthesis of these CuONPs make them particularly attractive in several application from nanotechnology to biomedical science.

Varied-shaped gold nanoparticles with nanogram killing efficiency as potential antimicrobial surface coatings for the medical devices.

Medical device-associated infections are a serious medical threat, particularly for patients with impaired mobility and/or advanced age. Despite a variety of antimicrobial coatings for medical devices being explored to date, only a limited number have been introduced for clinical use. Research into new bactericidal agents with the ability to eradicate pathogens, limit biofilm formation, and exhibit satisfactory biocompatibility, is therefore necessary and urgent. In this study, a series of varied-morphology gold nanoparticles in shapes of rods, peanuts, stars and spherical-like, porous ones with potent antibacterial activity were synthesized and thoroughly tested against spectrum of Candida albicans, Pseudomonas aeruginosa, Staphylococcus aureus clinical strains, as well as spectrum of uropathogenic Escherichia coli isolates. The optimization of gold nanoparticles synthesis allowed to develop nanomaterials, which are proved to be significantly more potent against tested microbes compared with the gold nanoformulations reported to date. Notably, their antimicrobial spectrum includes strains with different drug resistance mechanisms. Facile and cost-efficient synthesis of gold nanoparticles, remarkable bactericidal efficiency at nanogram doses, and low toxicity, underline their potential for development as a new coatings, as indicated by the example of urological catheters. The presented research fills a gap in microbial studies of non-spherical gold nanoparticles for the development of antimicrobial coatings targeting multidrug-resistant pathogens responsible for device-associated nosocomial infections.

Synthesis and design of Ag-Fe bimetallic nanoparticles as antimicrobial synergistic combination therapies against clinically relevant pathogens.

The inappropriate use of antibiotics and the inadequate control of infections have led to the emergence of drug-resistant strains. In recent years, metallo-pharmaceutics and metallic nanoparticles have been proposed as potential alternative antimicrobials due to their broad-spectrum antimicrobial properties. Moreover, recent findings have shown that combinations of transition metal compounds can exhibit synergistic antimicrobial properties. Therefore, the synthesis and design of bimetallic nanoparticles is a field worth exploring to harness the interactions between groups of metals and organic complex structures found in different microbial targets, towards the development of more efficient combinatorial antimicrobials composed of synergistic metals. In this study, we present a green synthesis of Ag-Fe bimetallic nanoparticles using an aqueous extract from the leaves of Gardenia jasminoides. The characterization of the nanoparticles demonstrated that the synthesis methodology produces homogenously distributed core-shell Ag-Fe structures with spherical shapes and average diameter sizes of 13 nm (± 6.3 nm). The Ag-Fe bimetallic nanoparticles showed magnetic and antimicrobial properties; the latter were evaluated against six different, clinically relevant multi-drug-resistant microbial strains. The Ag-Fe bimetallic nanoparticles exhibited an antimicrobial (bactericidal) synergistic effect between the two metals composing the bimetallic nanoparticles compared to the effects of the mono-metallic nanoparticles against yeast and both Gram-positive and Gram-negative multidrug-resistant bacteria. Our results provide insight towards the design of bimetallic nanoparticles, synthesized through green chemistry methodologies, to develop synergistic combinatorial antimicrobials with possible applications in both industrial processes and the treatment of infections caused by clinically relevant drug-resistant strains.

Influence of Funneliformis mosseae enhanced with titanium dioxide nanoparticles (TiO2NPs) on Phaseolus vulgaris L. under salinity stress.

The Arbuscular mycorrhizal fungi (AMF) (Funneliformis mosseae), are the most widely distributed symbiont assisting plants to overcome counteractive environmental conditions. In order to improve the sustainability and the activity of AMF, the use of nanotechnology was important. The main objective of this study was to investigate the effect of titanium dioxide nanoparticles (TiO2NPs) on the activity of AMF in common bean roots as well as its activity under salinity stress using morphological and molecular methods. The activity of AMF colonization has increased in the presence of TiO2NPs especially for arbuscule activity (A%), which increased three times with the presence of TiO2NPs. The improvement rate of Funneliformis mosseae on plant growth increased from 180% to 224% of control at the lowest level of salinity and increased from 48% to 130% at higher salinity level, respectively. The AMF dependencies for plant dry biomass increased in the presence of TiO2NPs from 277% in the absence of salinity to 465 and 883% % at low and high salinity levels, respectively. The presence of AMF co-inoculated with TiO2NPs resulted in increasing the salinity tolerance of plants at all levels and reached 110% at salinity level of 100 mM NaCl. Quantitative colonization methods showed that the molecular intensity ratio and the relative density of paired inocula AMF Nest (NS) or chitin synthases gene (Chs) with TiO2NPs were higher significantly P.>0.05 than single inoculants of AMF gene in roots under the presence or the absence of salinity by about two folds and about 40%. Hence, the positive effect of TiO2NPs was confined to its effect on AMF not on bean plants itself.

Synthesis, characterization and kinetic study of silver and gold nanoparticles produced by the archaeon Haloferax volcanii.

AIMS: To evaluate the ability of the haloarchaeon Haloferax volcanii to produce Ag and Au nanoparticles (NPs) and to characterize the obtained material in order to find relevant properties for future potential applications. METHODS AND RESULTS: Nanoparticles were produced by incubating H. volcanii cells with the corresponding metal salt. In the presence of precursor salts, cultures evidenced a colour change associated to the formation of metallic nanostructures with plasmonic bands located in the visible range of the spectrum. X-ray fluorescence analysis confirmed the presence of Ag and Au in the NPs which were spherical, with average sizes of 25 nmol l-1 (Ag) and 10 nmol l-1 (Au), as determined by electronic microscopy. Fourier transformed infrared spectroscopy indicated that both types of NPs showed a stable protein capping. Ag NPs evidenced antibacterial activity and Au NPs improved the specificity of polymerase chain reaction reactions. Au and Ag NPs were able to reduce 4-nitrophenol when incubated with NaBH4 . CONCLUSIONS: Haloferax volcanii is able to synthesize metallic NPs with interesting properties for technological applications. SIGNIFICANCE AND IMPACT OF THE STUDY: Our data demonstrate the ability of H. volcanii to synthesize metal NPs and constitutes a solid starting point to deepen the study and explore novel applications.

Biosynthesis of bismuth selenide nanoparticles using chalcogen-metabolizing bacteria.

Cost and energy reductions in the production process of bismuth chalcogenide (BC) semiconductor materials are essential to make thermoelectric generators comprised of BCs profitable and CO2 neutral over their life cycle. In this study, as an eco-friendly production method, bismuth selenide (Bi2Se3) nanoparticles were synthesized using the following five strains of chalcogen-metabolizing bacteria: Pseudomonas stutzeri NT-I, Pseudomonas sp. RB, Stenotrophomonas maltophilia TI-1, Ochrobactrum anthropi TI-2, and O. anthropi TI-3 under aerobic conditions. All strains actively volatilized selenium (Se) by reducing selenite, possibly to organoselenides. In the growth media containing bismuth (Bi) and Se, all strains removed Bi and Se concomitantly and synthesized nanoparticles containing Bi and Se as their main components. Particles synthesized by strain NT-I had a theoretical elemental composition of Bi2Se3, whereas those synthesized by other strains contained a small amount of sulfur in addition to Bi and Se, making strain NT-I the best Bi2Se3 synthesizer among the strains used in this study. The particle sizes were 50-100 nm in diameter, which is sufficiently small for nanostructured semiconductor materials that exhibit quantum size effect. Successful synthesis of Bi2Se3 nanoparticles could be attributed to the high Se-volatilizing activities of the bacterial strains. Selenol-containing compounds as intermediates of Se-volatilizing metabolic pathways, such as methane selenol and selenocysteine, may play an important role in biosynthesis of Bi2Se3.

Biomining of iron-containing nanoparticles from coal tailings.

Sulfur minerals originating from coal mining represent an important environmental problem. Turning these wastes into value-added by-products can be an interesting alternative. Biotransformation of coal tailings into iron-containing nanoparticles using Rhodococcus erythropolis ATCC 4277 free cells was studied. The influence of culture conditions (stirring rate, biomass concentration, and coal tailings ratio) in the particle size was investigated using a 23 full factorial design. Statistical analysis revealed that higher concentrations of biomass produced larger sized particles. Conversely, a more intense stirring rate of the culture medium and a higher coal tailings ratio (% w/w) led to the synthesis of smaller particles. Thus, the culture conditions that produced smaller particles (< 50 nm) were 0.5 abs of normalized biomass concentration, 150 rpm of stirring rate, and 2.5% w/w of coal tailings ratio. Composition analyses showed that the biosynthesized nanoparticles are formed by iron sulfate. Conversion ratio of the coal tailings into iron-containing nanoparticles reached 19%. The proposed biosynthesis process, using R. erythropolis ATCC 4277 free cells, seems to be a new and environmentally friendly alternative for sulfur minerals reuse.

Biogeochemical gold cycling selects metal-resistant bacteria that promote gold particle transformation.

Bacteria catalyze the dissolution and re-precipitation of gold, thereby driving the biogeochemical cycle of gold. Dissolution of gold/silver and re-precipitation of gold transforms gold particles by increasing gold purity. While soluble gold complexes are highly cytotoxic, little is known about how gold cycling affects bacterial communities residing on gold particles. Micro-analysis of gold particles obtained from Western Australia revealed porous textures and aggregates of pure gold nanoparticles, attributable to gold dissolution and re-precipitation, respectively. By interpreting structure and chemistry of particles, the kinetics of gold biogeochemical cycling at the site was estimated to be 1.60 × 10-9 M year-1. Bacterial communities residing on particles were composed of Proteobacteria (42.5%), Bacteroidetes (20.1%), Acidobacteria (19.1%), Firmicutes (8.2%), Actinobacteria (3.7%) and Verrucomicrobia (3.6%). A bacterial enrichment culture obtained from particles contained a similar composition. Exposure of enrichments to increasing concentrations of soluble gold decreased community diversity and selected for metal-resistant bacteria. Lower gold concentrations, which corresponded well with the concentration from the kinetic rate, provided a selective pressure for the selection of metal-resistant organisms while retaining the overall diversity. In conclusion, biogeochemical gold cycling directly influences bacterial communities on gold particles, thereby contributing to a continuum of particle transformation.

Mycosynthesis of Size-Controlled Silver Nanoparticles through Optimization of Process Variables by Response Surface Methodology.

The present study was carried out to reduce the size of silver nanoparticles (AgNPs) by optimizing physico-chemical conditions of the Aspergillus fumigatus BTCB10 growth based on central composite design (CCD) through response surface methodology (RSM). Variables such as a concentration of silver nitrate (mM), NaCl (%) and the wet weight of biomass (g) were controlled to produce spherical, monodispersed particles of 33.23 nm size, observing 78.7% reduction in size as compared to the initially obtained size that was equal to 356 nm. The obtained AgNPs exhibited negative zeta potential of -9.91 mV with a peak at 420 nm in the UV-Vis range whereas Fourier Transform Infrared (FT-IR) analysis identified O-H, C = C, C ≡ C, C-Br and C-Cl groups attached as capping agents. After conducting RSM experiments, a high nitrate reductase activity value of 179.15 nmol/h/ml was obtained; thus indicating a likely correlation between enzyme production and AgNPs synthesis. The F-value (significant at 3.91), non-significant lack of fit and determination coefficient (R2 = 0.7786) is representative of the good relation between the predicted values of response. We conclude that CCD is an effective tool in obtaining significant results of high quality and efficiency.The present study was carried out to reduce the size of silver nanoparticles (AgNPs) by optimizing physico-chemical conditions of the Aspergillus fumigatus BTCB10 growth based on central composite design (CCD) through response surface methodology (RSM). Variables such as a concentration of silver nitrate (mM), NaCl (%) and the wet weight of biomass (g) were controlled to produce spherical, monodispersed particles of 33.23 nm size, observing 78.7% reduction in size as compared to the initially obtained size that was equal to 356 nm. The obtained AgNPs exhibited negative zeta potential of ­9.91 mV with a peak at 420 nm in the UV-Vis range whereas Fourier Transform Infrared (FT-IR) analysis identified O­H, C = C, C ≡ C, C­Br and C­Cl groups attached as capping agents. After conducting RSM experiments, a high nitrate reductase activity value of 179.15 nmol/h/ml was obtained; thus indicating a likely correlation between enzyme production and AgNPs synthesis. The F-value (significant at 3.91), non-significant lack of fit and determination coefficient (R2 = 0.7786) is representative of the good relation between the predicted values of response. We conclude that CCD is an effective tool in obtaining significant results of high quality and efficiency.

Fusarium mangiferae as New Cell Factories for Producing Silver Nanoparticles.

Finding a safe and broad-spectrum medication is a goal of scientists, pharmacists, and physicians, but developing and fabricating the right medicine can be challenging. The current study describes the formation of silver nanoparticles (AgNPs) by Fusarium mangiferae. It involves the antibiofilm activity of the nanoparticles against Staphylococcus aureus. It also involves cytotoxic effect against mammalian cell lines. Well-dispersed nanoparticles are formed by F. mangiferae. The sizes of the nanoparticles were found to range from 25 to 52 nm, and UV-Vis scan showed absorption around 416-420 nm. SEM, TEM, and AFM results displayed spherical and oval shapes. Furthermore, the FTIR histogram detected amide I and amide II compounds responsible for the stability of AgNPs in an aqueous solution. AgNPs were observed to decrease the formation of biofilm at 75% (v/v). DNA reducing, smearing, and perhaps fragmentation were noticed after treating the bacterial cells with 50% (v/v). Additionally, cell lysis was detected releasing proteins in the supernatant. It was also observed that the AgNPs have the ability to cause 59% cervical cancer cell line (HeLa) deaths at 25% (v/v), however, they showed about 31% toxicity against rat embryo fibroblast transformed cell lines (REF). The results of this study prove the efficiency of AgNPs as an antibiofilm against S. aureus, suggesting that AgNPs could be an alternative to antibiotics. It must also be emphasized that AgNPs displayed cytotoxic behavior against mammalian cell lines. Further studies are needed for assessing risk in relation to the possible benefit of prescribing AgNPs.

Role of plant phytochemicals and microbial enzymes in biosynthesis of metallic nanoparticles.

Metal-based nanoparticles have gained tremendous popularity because of their interesting physical, biological, optical, and magnetic properties. These nanoparticles can be synthesized using a variety of different physical, chemical, and biological techniques. The biological means are largely preferred as it provides an environmentally benign, green, and cost-effective route for the biosynthesis of nanoparticles. These bioresources can act as a scaffold, thereby playing the role of reducing as well as capping agents in the biosynthesis of nanoparticles. Medicinal plants tend to have a complex phytochemical constituent such as alcohols, phenols, terpenes, alkaloids, saponins, and proteins, while microbes have key enzymes which can act as reducing as well as stabilizing agent for NP synthesis. However, the mechanism of biosynthesis is still highly debatable. Herein, the present review is directed to give an updated comprehensive overview towards the mechanistic aspects in the biosynthesis of nanoparticles via plants and microbes. Various biosynthetic pathways of secondary metabolites in plants and key enzyme production in microbes have been discussed in detail, along with the underlying mechanisms for biogenic NP synthesis.

Bactericidal finishing of loomstate, scoured and bleached cotton fibres via sustainable in-situ synthesis of silver nanoparticles.

Loomstate-, scoured- and bleached cotton fabrics were first activated by treatment with ethanolamine and; thus obtained three fabrics were submitted independently to in-situ formation of silver nanoparticles (AgNPs) using different concentrations of silver nitrate (AgNO3) in absence of other external precursor. The magnitude of AgNPs on the fabric increases by increasing AgNO3 concentrations during synthesis of AgNPs loaded fabrics irrespective of the fabric used. Loomstate- and scoured cotton fabrics with the highest amount of AgNPs exhibit spherical shape with less aggregates; opposite to their bleached mate where AgNPs are irregularly shaped with bigger size due to aggregation. The formation of AgNPs is confirmed through monitoring UV-vis absorption peak. Results signify also the formation of high density coating of silver on the surface of cotton fabric. Fabrics loaded with AgNPs exhibit superior antibacterial activity. Treatment with distilled water of AgNPs loaded scoured cotton fabric filtered by centrifugation verify the very slow launching of AgNPs indicating excellent durability; a point which advocates the use of such fabrics in infection prevention applications. Indeed, the basic and practice entailed in current studies can be nominated strongly for cleaner bactericidal finishing of cotton.

Biorefining of platinum group metals from model waste solutions into catalytically active bimetallic nanoparticles.

Bacteria can fabricate platinum group metal (PGM) catalysts cheaply, a key consideration of industrial processes and waste decontaminations. Biorecovery of PGMs from wastes is promising but PGM leachates made from metallic scraps are acidic. A two-step biosynthesis 'pre-seeds' metallic deposits onto bacterial cells benignly; chemical reduction of subsequent metal from acidic solution via the seeds makes bioscaffolded nanoparticles (NPs). Cells of Escherichia coli were seeded using Pd(II) or Pt(IV) and exposed to a mixed Pd(II)/Pt(IV) model solution under H2 to make bimetallic catalyst. Its catalytic activity was assessed in the reduction of Cr(VI), with 2 wt% or 5 wt% preloading of Pd giving the best catalytic activity, while 1 wt% seeds gave a poorer catalyst. Use of Pt seeds gave less effective catalyst in the final bimetallic catalyst, attributed to fewer and larger initial seeds as shown by electron microscopy, which also showed a different pattern of Pd and Pt deposition. Bimetallic catalyst (using cells preloaded with 2 wt% Pd) was used in the hydrogenation of soybean oil which was enhanced by ~fourfold using the bimetallic catalyst made from a model waste solution as compared to 2 wt% Pd preloaded cells alone, with a similar selectivity to cis C18:1 product as found using a Pd-Al2 O3 commercial catalyst.

Palladium bionanoparticles production from acidic Pd(II) solutions and spent catalyst leachate using acidophilic Fe(III)-reducing bacteria.

The acidophilic, Fe(III)-reducing heterotrophic bacteria Acidocella aromatica PFBCT and Acidiphilium cryptum SJH were utilized to produce palladium (Pd) bionanoparticles via a simple 1-step microbiological reaction. Monosaccharide (or intracellular NADH)-dependent reactions lead to visualization of intra/extra-cellular enzymatic Pd(0) nucleation. Formic acid-dependent reactions proceeded via the first slow Pd(0) nucleation phase and the following autocatalytic Pd(II) reduction phase regardless of the presence or viability of the cells. However, use of active cells (with full enzymatic and membrane protein activities) at low formic acid concentration (5 mM) was critical to allow sufficient time for Pd(II) biosorption and the following enzymatic Pd(0) nucleation, which consequently enabled production of fine, dense and well-dispersed Pd(0) bionanoparticles. Differences of the resultant Pd(0) nanoparticles in size, density and localization between the two bacteria under each condition tested suggested different activity and location of enzymes and membrane "Pd(II) trafficking" proteins responsible for Pd(0) nucleation. Despite the inhibitory effect of leaching lixiviant and dissolved metal ions, Pd(0) bionanoparticles were effectively formed by active Ac. aromatica cells from both acidic synthetic Pd(II) solutions and from the actual spent catalyst leachates at equivalent 18-19 nm median size with comparable catalytic activity.

Modelling of growth kinetics of Vibrio cholerae in presence of gold nanoparticles: effect of size and morphology.

Emergence of multiple drug resistant strains of pathogenic bacteria calls for new initiatives to combat infectious diseases. Gold nanoparticles (AuNPs), because of their non-toxic nature and size/shape dependent optical properties, offer interesting possibility. Here we report the antibacterial efficacy of AuNPs of different size and shape (AuNS10, AuNS100 and AuNR10; the number indicating the diameter in nm; S stands for sphere and R for rod) against the classical (O395) and El Tor (N16961) biotypes of Vibrio cholerae, the etiological agent responsible for cholera. Growth kinetics was monitored by measuring optical density at different time intervals and fitted by non-linear regression of modified Buchanan model. Sigmoidal growth curve for VcO395 indicated the existence of single phenotype population and was affected by AuNR10 only, implying the importance of morphology of AuNP. Growth of VcN16961 was affected by all three AuNPs indicating the vulnerability of El Tor biotype. Interestingly, VcN16961 exhibited the occurrence of two phenotypic subpopulations - one with shorter (vulnerable Type 1) and the other with extended (tolerant Type 2) lag phase. Various assays were conducted to probe the impact of AuNPs on bacterial cells. Apart from AuNR10, antimicrobial efficacy of AuNS10 was better compared to AuNS100.

Actinomycetes-mediated biogenic synthesis of metal and metal oxide nanoparticles: progress and challenges.

Actinomycetes-mediated biogenic synthesis of metal nanoparticles and their antimicrobial activities are well documented. Actinomycetes facilitate both intracellular and extracellular metal nanoparticles synthesis and are efficient candidates for the production of polydispersed, stable and ultra-small size metal nanoparticles. Secondary metabolites and new chemical entities derived from Actinomycetes have not been extensively studied for the synthesis of metal/metal oxide nanoparticles. The present review focuses on biogenic synthesis of metal nanoparticles from Actinomycetes and the scope for exploring Actinomycetes-derived compounds (enzymes, organics acids and bioactive compounds) as metal and metal oxide reducing agents for the synthesis of desired nanoparticles. This review also focuses on challenges faced in the applications of nanoparticles and the methods to synthesize biogenic metal nanoparticles with desired physiochemical properties such as ultra-small size, large surface to mass ratio, high reactivity etc. Methods to evade their toxicity and unique interactions with biological systems to improve their chance as an alternative therapeutic agent in medical and pharmaceutical industry are also discussed.

Synthetic Biogenesis of Bacterial Amyloid Nanomaterials with Tunable Inorganic-Organic Interfaces and Electrical Conductivity.

Amyloids are highly ordered, hierarchal protein nanoassemblies. Functional amyloids in bacterial biofilms, such as Escherichia coli curli fibers, are formed by the polymerization of monomeric proteins secreted into the extracellular space. Curli is synthesized by living cells, is primarily composed of the major curlin subunit CsgA, and forms biological nanofibers with high aspect ratios. Here, we explore the application of curli fibers for nanotechnology by engineering curli to mediate tunable biological interfaces with inorganic materials and to controllably form gold nanoparticles and gold nanowires. Specifically, we used cell-synthesized curli fibers as templates for nucleating and growing gold nanoparticles and showed that nanoparticle size could be modulated as a function of curli fiber gold-binding affinity. Furthermore, we demonstrated that gold nanoparticles can be preseeded onto curli fibers and followed by gold enhancement to form nanowires. Using these two approaches, we created artificial cellular systems that integrate inorganic-organic materials to achieve tunable electrical conductivity. We envision that cell-synthesized amyloid nanofibers will be useful for interfacing abiotic and biotic systems to create living functional materials..

Magnetic Trapping of Bacteria at Low Magnetic Fields.

A suspension of non-magnetic entities in a ferrofluid is referred to as an inverse ferrofluid. Current research to trap non-magnetic entities in an inverse ferrofluid focuses on using large permanent magnets to generate high magnetic field gradients, which seriously limits Lab-on-a-Chip applications. On the other hand, in this work, trapping of non-magnetic entities, e.g., bacteria in a uniform external magnetic field was studied with a novel chip design. An inverse ferrofluid flows in a channel and a non-magnetic island is placed in the middle of this channel. The magnetic field was distorted by this island due to the magnetic susceptibility difference between this island and the surrounding ferrofluid, resulting in magnetic forces applied on the non-magnetic entities. Both the ferromagnetic particles and the non-magnetic entities, e.g., bacteria were attracted towards the island, and subsequently accumulate in different regions. The alignment of the ferrimagnetic particles and optical transparency of the ferrofluid was greatly enhanced by the bacteria at low applied magnetic fields. This work is applicable to lab-on-a-chip based detection and trapping of non-magnetic entities bacteria and cells.